-40%
very unusual Morin bench plane w/ brass frame & wood infill & handle
$ 102.96
- Description
- Size Guide
Description
You are biddingon one unusual Morin wood plane as pictured.
It is marked "MORIN" on the diagonal handle near the front end, and "Btd SGDG" on the cap. The iron is unmarked.
Overall length is about 11-13/16", and the iron is about 1-7/8" in width. The iron is about 8-3/8" in length.
The plane is French in origin, but I can't tell you anything about who made it. My guess is that "SGDG" is related to the French patent system, but I don't know that for sure.
There are a few of these planes pictured on the internet, and those planes don't have the infill under the iron, and those planes all seem to have a bakelite rear handle. This plane has a wood rear handle, that seems to fit well, and has the wood infill under the iron. The rear handle is glued in place at the top and bottom, while the infill piece is loose and just sitting there. Are they original, perhaps a later variation, or did someone skillfully make them? I don't know.
The adjustment of the iron is strange, as the others on the internet will attest. The throat is really tight, and the pivoting cap tends to want to flex the iron downward. If you install the iron bevel down, as you would expect, the front of the iron is really tight against the front of the throat, although tightening the cap screw will flex the iron down slightly. I finally put the iron in upside down, bevel up, so at least I could remove it. The lever will secure the iron, but you have to slide the iron up a ways to get the cap to pivot out of the way so the lever can turn 180 degrees where the iron can be lifted off. The iron appears to be original, based on photographs of irons in other Morin planes, and I vaguely remember another one of these that I had some years back.
The frame and most of the hardware are brass.
Condition, other than the question of whether the handle and infill are original, is good to very good. It would benefit from a light cleaning. The sole has a few scratches, and the iron has some faint almost imperceptible pitting.
Except as noted, t
here are no cracks or chips or chunks missing from any of the castings, and everything operates properly.
SHIPPING: 4 pounds when boxed, insurance and signature confirmation are included. N
o International shipping.
I sell what I enjoy, and I collect antique woodworking tools and I enjoy photography!
The queue is overflowing with tools right now, as they seem to be finding me faster than I can list them. So please keep watching my postings as I have LOTS more to list!
Searching my listings: I have lots to see! Some of you will undoubtedly enjoy browsing through everything, but if you want to hone in on something specific, I suggest you click on the "Visit Store" link in Seller Information section in the upper right of this listing. That will lead you to my extensive system of categories.
You might ask: How can I know when you start new listings? The answer: please click the "Sign Up For Newsletter" link that is just above and to the left of this description, and you will get an email every Friday with my new listings, as well as an email whenever I put any of my Buy It Now items on sale.
ETHICS IN DESCRIPTIONS: I also buy for my collecting on eBay, and I have been burned too many times by misleading (duh did I forget to mention .......) descriptions, and auctions with pictures only of the left side because the right side was trashed. Life is much simpler for me if I disclose what I know or see about an item before you bid, and especially before you receive it in the mail. I come from the handshake school of doing business, and hopefully you are like me and understand what that means. What goes around, comes around.
RETURN POLICY: I believe that if you give honest descriptions, and include enough pictures, you shouldn't need a return policy. However, that doesn't mean that I won't make an occasional mistake. Please bid with the assurance that if I have made an error in my listing, I WILL take care of you. And if you have made an error, and bought the wrong size, for example, I will still take care of you (but I’ll let you pay the return shipping!).
SALES TAX: Interstate sales tax is rapidly becoming a reality in more and more states. If I ship to a state where eBay is required to collect sales tax, eBay will charge you the sales tax for that state.
There is lots of information available from eBay that explains it in much more detail. The sales tax is completely out of my hands -- I don't have anything to do with deciding whether to charge tax, I don't have anything to do with deciding the tax rate, and I never see any of the funds that are collected, they go directly to eBay.
SELLING OUTSIDE OF EBAY: Why would I risk my lengthy good standing with eBay to save you a couple of dollars? Especially when you ask on an email that is sent through the eBay email system? Please don't ask, the answer is no.
SHIPPING IN THE US: I would rather that you spend your money on my stuff, and not on shipping.
I package well, and have a great track record
of getting everything to each buyer, and getting it there in one piece.
I try to pick the best shipping option for each listing, based on what is the least expensive, and based on what I think is needed to protect the item. I use the US Post Office for everything. If the value is 0 or over, eBay requires your signature at the USPS delivery for the buyer and seller protections to be in effect.
USPS POSTAGE RATE INCREASE AS OF January. Every year the US Postal Service raises rates in mid to late January, and this year is no exception.
INTERNATIONAL SHIPPING: I no longer ship Internationally.
AUCTIONS: I won’t end an auction listing early to sell it to you directly. As a bidder, I really dislike going back at the end of an auction to bid, only to discover that the seller had ended the auction early. So I won’t do that for you, or to you.
PACKAGING: Please check my feedback -- I package well. I figure if you take the time to purchase from me, then I can take the time to package it well, and not just throw it into a cereal box with a scrap of newspaper.
I hope someday I will meet some of you as we trudge the happy road of tool collecting!