-40%
Stanley No. 45 Combination Plane C.1921-1935 and Stanley Cutters C. 1920
$ 61.77
- Description
- Size Guide
Description
Stanley No. 45 Combination Plane C.1921-1935, with the Sweet Heart logo. The heart is on the lower line of the notched rectangle logo. All parts are original except for the front knob, it is a replacement. It is not rosewood. The rear handle and the sliding rail are rosewood. The thumb screw for the slitting knife is missing. The plane comes with one cam, two long parallel rods, beading stop gauge, slitting knife and other parts. The plane is complete having a main stock, sliding stock, and fence. The body shows wear, the nickel finish is flaked. Spurs are intact and screws work. The soles of the main stock are straight and smooth. The fence is adjustable.The Stanley Cutters, C. 1920, show the Sweet Heart logo, with the heart inside the notched rectangle. The cutters were made by the Stanley Rule and Level Plant, The Stanley Works, New Britain, Conn. USA.
The box "Cutters for Stanley Plane, No. 45 " cutter Box No. 2 is original, manufactured by Stanley Rule and Level Plant, The Stanley Works, New Britain, Conn. USA. It contains the following ten (10) cutters: from left to right, cutter no.12 1/4 "; cutter no. 13 5/16 "; cutter no. 14 3/8"; cutter no.15 7/16"; cutter no. 18 1/2 1 3/16"; not from box 1 1/8"; not from box 1 1/2"; cutter no.16 1/2"; not from box 9/16"; cutter no.17 5/8". All cutters have a notched end. No rust, good condition. Cutter no. 16 has nick on edge, needs honing.
Not all cutters are original to this box, original cutters no. 9, 10, 11, 18, and 19 are not included in this box. Nos. 12,13, 14, 15, 16, 17, and 18 1/2 are original and included with thisbox. Other cutters came from other sets.
The second box of cutters, "Cutters for 45 Plane", contains the following 11 cutters, from left to right, cutter no. 10 1/8" (this cutter is missing approx. 5/16" on the notched end); cutter no. 11 3/16"; cutter no. 12 1/4"; cutter no. 13 5/16"; cutter no. 14 3/8"; cutter no.15 7/16"; cutter no. 16 1/2"; cutter no. 17 5/8"; cutter no. 18 3/4"; cutter no. 19 7/8"; and cutter no. 9 1 1/4". All cutters, except for no. 10, are 3 11/16 " long. All have been used and honed at one point. Clean bare metal finish on upper face, used patena on opposite side.