Gorilla Adhesive Spray Mist Heavy Duty Permanent Photo Safe 14oz Clear, 2-Pack

Description

Ebay Template
Home
About
feedback
contact
Fast Shipping
Great Prices
Easy Returns
Best Support
Gorilla Adhesive Spray Mist Heavy Duty Permanent Photo Safe 14oz Clear, 2-Pack
PRODUCT ID:
N-GG-6301502-2PK
Item features
Quantity: 2-Pack
Gorilla Adhesive Spray
14 Ounce
Heavy Duty Bond - Dries Permanent
Easy to Use - Repositionable
Clear Color - Non-Yellowing (Direct UV exposure may affect color)
Comfort Wide Pad Nozzle
Controlled Fine Mist
Photo Safe
Indoor & Outdoor - Moisture Resistant
Multi-Purpose
Bonds fabric, paper, wood, plastic*, cardboard, foam, metal and more!
Meets VOC Standard:<30% VOC Mist Spray Adhesive
Item Details
Gorilla Spray Adhesive is heavy duty, multi-purpose and easy to use. Gorilla Spray Adhesive forms a clear, permanent bond that is moisture resistant and can be used on projects both indoors and out. This spray adhesive is also photo safe. Its wide pad nozzle and controlled, fine mist spray provide an even application on the project you are working on.
The 14 ounce Spray can is a non-yellowing clear color which has a comfort nozzle. It is repositionable and easy to use.
All surfaces should be clean and free of dirt, grease 
and oil. Protect surrounding areas from overspray to
 avoid residual adhesive.
DIRECTIONS:
1. Shake can well before using.
2. Hold the can 6 to 8 inches from surfaces to be bonded and spray an even coat of adhesive.
3. For Maximum Bond Strength: Spray both surfaces
 to be joined. Allow to dry to tack (approximately 
1 minute) and press surfaces firmly together.
For Repositionable Bonds: Spray a light 
even coat on one surface. Allow to dry 1-3 minutes
 before joining. Repositionable up to 10 minutes
 depending on surface type, then bond becomes 
permanent. To remove, gently peel from corner.
Tip: To avoid possible clogging, turn can away from 
body, turn upside down and spray a short jet of clear
 gas after completing the job.
3. For Maximum Bond Strength: Spray both surfaces
 to be joined. Allow to dry to tack (approximately 
1 minute) and press surfaces firmly together.
For Repositionable Bonds: Spray a light 
even coat on one surface. Allow to dry 1-3 minutes
 before joining. Repositionable up to 10 minutes
 depending on surface type, then bond becomes 
permanent. To remove, gently peel from corner.
Tip: To avoid possible clogging, turn can away from 
body, turn upside down and spray a short jet of clear
 gas after completing the job.
*Not recommended for use on vinyl materials,
 automotive headliners, polypropylene, polyethylene or
 similar materials. Do not use for bonding weighted 
materials.
© 2017 Fresh Colony, All Rights Reserved